The beginning of every spear: the plant
Planted in the ground by hand with the help of machines, this is where every asparagus spear begins: our asparagus plant. The rhizome – the plant’s rootstock – consists of many underground stems growing horizontally, which sprout as shoots in spring. That’s the asparagus we know. Asparagus plants are generally grown from the seeds of the female asparagus plant. For growing our asparagus, however, we buy pre-grown rootstocks which, after a period of cold treatment in one of our cold stores, we plant around 30–40 cm deep in the loamy soil of the Stade Geest.
The earth ridge for optimal growth
Once the plants are in the ground, the well-known earth ridges are created for white asparagus, drawn by tractor along the centre of the asparagus plants. This creates optimal growing conditions for the plant.
The ridge stores the necessary heat, protects against frost, stabilises the plant, minimises weed growth and limits lateral root growth. Under these optimal conditions, the asparagus plant typically produces 8 to 12 spears per season.
Film tunnels: harvest management and pest protection
We build so-called film tunnels over the ridges. They’re all set up by hand and are essential for cultivation, because they allow us to guarantee an early harvest and control its timing. Depending on when they’re put in place and whether the black or the white side is used, we slow down or speed up the growth process. With the black film, we absorb more sunlight and convert it into heat. The asparagus grows faster. The white side of the film, on the other hand, reflects the light and prevents the earth ridge from heating up too much. The asparagus grows more slowly. Depending on the weather and demand, we turn the films by hand several times during the season.
In addition, the films – which, by the way, are reused for up to 10 years and then recycled – provide protection from the weather, weed control, protection from pests and improved growing conditions.
Asparagus harvest – cut by hand for you
When the tip of the asparagus peeks out of the earth ridge, it’s ready to be harvested. According to the textbook, harvest workers cut the asparagus before it even breaks through the soil, but thanks to the film tunnels this is less of a concern. As soon as the asparagus tip sees sunlight, it turns purple – and that’s not what we want. Asparagus also turns purple under film, but we have more time before that happens.
Either way, our harvest workers cut every single spear by hand, come rain or shine, using a so-called “swallowtail knife” – about 30 cm long, slightly curved at the end and fitted with a V-shaped blade. They clear away some soil along the spear by hand, position the knife, cut, close the hole again – and “just like that”, the asparagus spear is harvested. Our seasonal workers are supported by our “asparagus spiders”, which move along automatically at walking pace during the harvest, lift and lower the film and transport the crates of harvested asparagus.
Green asparagus is harvested a little differently: since the spears grow above ground – which, by the way, is why they turn green thanks to the sunlight and the resulting photosynthesis – they are simply cut with a knife just above the soil.
Transport and initial washing
Once crate after crate of asparagus has been cut, we transport the harvest from various fields to our farm in Deinste, where we prepare the asparagus for further processing and sale. As the spears naturally come fresh out of the ground, this natural product is still covered in a lot of soil.
To remove it from the asparagus spears, we take all the crates filled with asparagus from the loading area of our transport vehicle and place them on the conveyor belt of our washing system before moving on to the next production step.
Recording our asparagus harvest
Each of our asparagus harvest crates has two barcodes that identify the team member and the field harvested. Directly after the initial wash, the crates travel along the conveyor belt to the scales, where our team records the harvested quantity in the system.
This allows us to manage the harvest field by field and to pay our harvest workers their well-earned piece-rate wages. Each harvest worker cuts between 100 and 200 kilograms per day, which corresponds to roughly 15 to 25 kilograms per hour.
Asparagus grading: a little photo shoot
We then place the recorded asparagus, step by step, on another conveyor belt that leads to our asparagus grading machine.
Before each individual spear is photographed three times there and assigned to the grades we’ve defined, the machine rinses the spears with water again and cuts a small piece off the end so that all spears are the same length.
The asparagus grading machine uses a high-speed camera to measure the thickness, curvature and colour of each spear before it is sorted into different compartments and packed into asparagus crates by our team. Our machine scans more than 200 spears per minute, and considerably more at peak times.
In total, we offer up to 17 grades of white asparagus and three grades of green asparagus. Depending on availability, there may of course be more or fewer grades.
Ice bath for extra freshness
Straight from the grading machine, the asparagus crates move on to our ice bath. Water at 0 °C flows through the sorted crates to cool the asparagus right to the core – for maximum freshness and good short-term storage.
The ideal storage temperature for asparagus is normally between 0 °C and 2 °C. This temperature keeps the asparagus cool without freezing it, while also slowing down spoilage.
Further processing: peeling …
Because we market our asparagus through many different channels, we offer a wide range of asparagus products for different customers. That’s why many hands take care of further processing in our production hall.
Among other things, we peel the asparagus for you. For this, we use several large peeling machines that peel up to 9,000 spears per hour fully automatically. How long do you think it would take you to peel that much asparagus?
… weighing and portioning …
Of course, especially for sale through food retailers, we don’t just offer loose asparagus. For this, our machines weigh and portion it fully automatically – for example, into 500 g bunches.
Despite state-of-the-art technology, many machines still require additional manual work. Placing the spears into the machine or occasionally re-peeling individual spears still has to be done by hand.
… cutting …
We also cut our so-called mini tips by hand, with a great deal of time and effort, and pack them into our packaging.
By the way: “waste” such as asparagus peel or trimmed ends is used partly by restaurants and partly by ourselves. These leftovers are ideal for returning to the fields as natural fertiliser at the end of the season.
… packing …
Our machines pack pre-portioned bunches or peeled asparagus just as automatically as they peel it. Our team places the asparagus spears into the machine one by one by hand and packs the finished packs into transport crates.
… checking, delivering and selling.
In the final step, before our team prepares the goods for delivery by hand, packs them into crates and picks the orders, we carry out our final quality check – for example, checking the pack weights.
Only after a successful check do our delivery drivers load the asparagus deliveries into their vehicles to bring them fresh and in perfect condition to you or to one of our shops. We supply our partners with our own logistics fleet of more than 25 vehicles, such as Mercedes Sprinters, and our own lorry.
The asparagus’s final destination: fresh on your plate
Once our fresh asparagus has finally made its way into our farm shop, your store, your restaurant or your fridge, all that’s left is to prepare it.
Whether classic with potatoes and hollandaise sauce or something a little more sophisticated – as a risotto, for example – it’s now entirely up to you and your taste! Short on ideas? No problem. You’ll find lots of delicious dishes in our recipe world here.
Recharging: the asparagus fern
What actually happens after the asparagus season? Exactly – once one season ends, the next one begins. The work in and around our fields naturally carries on. We let the asparagus plants grow out completely. The leafy plant that develops is what we call the “asparagus fern”. This stage is essential for the plant’s life cycle, as it contributes significantly to the health and productivity of the asparagus shoots. Like all green plants, the fern carries out photosynthesis, allowing the plant to store energy for the winter and for growth the following year. In addition, the root system stabilises and the soil improves when the dead fern is worked back into it – because at the end, it’s chopped up and worked into the soil.
Did you know how much work goes into growing asparagus? No? We can believe that. Of course, we’ll also be happy to show you our production in person on one of our farm tours. Find out more at https://www.werner-frische.de/event/werner-hoftour/!